| Analytical system |
Fully automated, for routine, STAT, urine, Fluid samples |
| Analytical methods |
Clinical chemistry and immunological parameters. End point, kinetic assays, fixed-time-kinetics, optionally ISE |
| Simultaneously processed analytes |
48 photometric tests, 51 with ISE |
| Throughput |
800 photometric tests/hour; maximum of 1200 with ISE |
| Sample feeder |
Racks with 10 samples each (bar codes on primary tubes and on racks); capacity of 150 samples; continuous loading |
| Sample tubes |
In primary and secondary tubes; diameter between 11.5 and 16.5 mm; height between 55 and 102 mm |
| STAT samples |
Up to 18 positions for STAT sampleswith bar codes |
| Sample volume |
2 – 50 µl in 1 µl steps (1 – 50 µl for repeats) |
| Reagent supply |
refrigerated (4 °C - 12 °C); 48 positions for R1/R2 |
| Reagent volume |
1. reagent: 25 – 300 µl; 2. reagent: 25 – 300 µl; (in 1 µl steps) |
| Total reaction volume |
152 – 550 µl |
| Reaction cuvette |
Quartz cuvettes |
| Reaction time |
Up to 8 minutes, 15 seconds |
| Reaction temperature |
37 °C |
| Mixing method |
With rotating paddles after dispensing sample and reagent |
| Photometry system |
Direct assay through the reaction cuvette (0 – 2.5 OD) mono, bichromatic measurements possible |
| Wavelength |
13 different wave lengths between 340 – 800 nm |
| Cuvette cleaning |
Comprehensive cleaning with detergents |
| Calibration |
linear and non linear (linear interpolation) |
| Data processing |
calculated parameters, blank value correction and correlation. Definition of normal
value range, measuring range, pathological values and repeats. Quality controls,
printout of abnormal values, pending sample work list and repeat run sample list |
| Test requisition |
Individual and profile test requisition via on line, mouse or functions keys |
| Water supply /waste |
automated supply with deionised water (40 l / hour); waste up to 100 mm height |
| Dimensions (W xHxD) (mm) |
ANL: 1680 x 1210 x 800; DPR: 700 x 1430 x 700 |
| Weight (kg) |
ANL: 480; PC: 70 |
| On-line |
full uni- and bidirectional communication possible |
| Power supply |
240 V ±10%; 4 kVA |
